Max dynamic
Omega couplings - a two-part insert, which consists of steel half-rings bonded with a properly shaped elastomer
The duality of the insert allows it to be installed and replaced without moving the combined devices. The simple construction of the clutch facilitates the axisization of cooperating devices – the inserts halves are fixed with special screws.
The element that determines the properties of Omega type couplings is the two-part insert, which consists of steel half-rings bonded with an appropriately shaped elastomer. The two-part insert allows its assembly and replacement without moving the connected devices. The simple design of the coupling facilitates the alignment of the cooperating devices - the insert halves are fastened with special screws.
Types of inserts:
D – short standard;
DS – long standard – designed to connect devices set at a greater distance from each other;
D-HT (red) – short reinforced – moment nom. about 30% higher, the torsion stiffness approx. 45% higher;
D-HS (turquoise) short to work under high humidity and elevated temperature conditions;