easyE-60 actuator

Never expose the actuator to hammer strike during installation or in other situations
Retrofitted bushings should be pressed into the bracket-borings. No hammering
Power supply without over-current protection can cause serious damage to the actuator at mechanical end-stop or when actuator is overloaded in another way
Keep piston tube clean
Longer cable lengths may cause voltage drop which affects the performance of the actuator
For medical applications (IEC60601-1, ANSI/AAMI/ES60601-1, CAN/CSA-C22.2 No60601-1):
Operating temperature +5ºC to +48ºC, Relative humidity 20% – 70% atmospheric pressure = 1atm.
Connect to medically approved supply source only and according to guidelines provided with the source
Function of the actuator is subject to the settings of the control box
The dust and water sealing of harsh environment actuators might affect their performance
All specifications are for 25 ºC ambient – low temperature might affect performance
Depending on load and application, nominal and actual stroke length may differ due to internal disc springs not being fully compressed
The combination of gearing and stroke can cause limitations in the use of „End limit FW“ when using the S2-3 controller

Features:

Stroke: 50, 100, 150, 200, 250, 300, 350, 400, 500 and 750mm (others on request)
Materials:
Motor and actuator tube are powder coated steel or stainless steel
Piston rod is stainless steel
Front and rear brackets are aluminium or stainless steel
Protection class: IP66 (standard), harsh environment (according to IP68 and IP69)
Temperature:
Operation: -20°C to +50°C
Storage: -40ºC to +70ºC
Cable: 1m, 2X1.3mm² (AWG16), Ø=6.4mm, black, Molex Mini-Fit Jr. 6 pin
Bending radius: 6x cable diameter
Max. static load/Self locking force: 18.100N, depending on stroke length for push-applications
Duty cycle: Max. 10% or 2 minutes in use followed by 18 minutes rest