Bansbach
easyE-25 actuator
Can be used almost anywhere
The new and slim actuator with 25mm diameter
- Power supply without over-current protection can cause serious damage to the actuator at mechanical end-stop or when actuator is overloaded in another way
- Radial forces might have an adverse affect on the performance or lead to damage of the actuator
- Keep piston tube clean
- Longer cable lengths may cause voltage drop which affects the performance of the actuator
- For medical applications (IEC60601-1, ANSI/AAMI/ES60601-1, CAN/CSA-C22.2 No60601-1):
- Operating temperature +5ºC to +48ºC, Relative humidity 20% – 70% atmospheric pressure = 1atm.
- Connect to medically approved supply source only and according to guidelines provided with the source.
- The dust and water sealing of “harsh environment” actuators might affect their performance
- All specifications are for 25 ºC ambient – low temperature might affect performance
- Depending on load and application, nominal and actual stroke length may differ due to internal disc springs not being fully compressed
- The combination of gearing and stroke can cause limitations in the use of „End limit FW“ when using the S2-3 controller. See more information
Features
- Stroke: 50, 100, 150, 200, 250mm
- Cable: 1m, 2X0.50mm² (AWG20), Ø=4.8mm, black, Molex Mini-Fit Jr. 6 pin
- Bending radius: 6x cable diameter
- Material: Motor and actuator tube are powder coated aluminium
- Piston rod is aluminium
- Front and rear brackets are PA
- Protection class: IP66 (Standard)
- Max. static load / PA Brackets: 1000N
- self locking force: Depending on stroke length for push-applications
- Max. Load to 250N for stroke > 250mm
- Temperature: -20°C to +70°C
- Storage: -40ºC to +70ºC
- Duty cycle: Max. 10% or 2 minutes in use followed by 18 minutes rest
Contact us
