Damped stoppers, electrically driven

Reliable stopping and precise positioning of one or more workpiece carriers at a defined stop point. Designed for seamless integration into modern conveyor systems, these units are available in variants featuring integrated damping technology for smooth, vibration-free stopping. The workpiece carrier is released for further transport by lowering the stop plate.

Your Value

• gentle deceleration and stopping of pallet through integrated damping system
• force of impact reduced by up to 95% in comparison to undamped stoppers
• high efficiency and low operating costs due to electromagnetic drive
• low installation cost by eliminating the pneumatic system
• short cycle times through high lowering speed of stop plate
• wide range of applications thanks to simple and infinitely adjustable damping force
• low noise

Find the products that best suits your needs!

ELD-40

Propelling force, max.: 45 N, min.: 0,4 N – Lowering stroke: 7,5 mm – 2x5pin M12x1 plug – Plastic stop (KU) – Customer-specific solutions – Various accessories

ELD-70

Propelling force, max.: 90 N, min.: 1,4 N – Different plug types – Different stop types – Different types of internal controls (also regarding total time for lowering/raising) – Customer-specific solutions – Various accessories

ELD-140

Propelling force, max.: 90 N, min.: 1,5 N – Lowering stroke: 8 mm – 2x5pin M12x1 plug – Plastic stop (KU) – Customer-specific solutions – Various accessories

ELD-195

Propelling force, max.: 200 N, min.: 2,5 N – Lowering stroke: 8 mm – 2x5pin M12x1 plug – Plastic stop (KU) – Customer-specific solutions – Various accessories

 

ELD-430

Propelling force, max.: 420 N, min.: 3,5 N – Lowering stroke: 11 mm – 2x5pin M12x1 plug – Plastic stop (KU) – Customer-specific solutions – Various accessories

ELD-660

Propelling force, max.: 450 N, min.: 5 N – Lowering stroke: 11 mm – 2x5pin M12x1 plug – Plastic stop (KU) – Customer-specific solutions – Various accessories

ELD-1200

Propelling force, max.: 750 N, min.: 65 N – Lowering stroke: 20 mm – 3x5pin M12x1 plug – Customer-specific solutions – Various accessories

DEL-235

Propelling force, max.: 419 N, min.: 25 N – Lowering stroke: 9 mm – Mechanical lock in lower position – Sensors to detect horizontal position of stop plate (damper extended/retracted) – Sensors to detect vertical position of stop plate (raised/lowered) – With manual remote control (bowden cable) – Customer-specific solutions – Various accessories

 

DEL-350-S2

Propelling force, max.: 200 N, min.: 80 N – Lowering stroke: 8 mm – Customer-specific solutions – Various accessories

DEL-400

Propelling force, max.: 419 N, min.: 25 N – Lowering stroke: 9 mm – Mechanical lock in lower position – Sensors to detect horizontal position of stop plate (damper extended/retracted) – Sensors to detect vertical position of stop plate (raised/lowered) – With manual remote control (bowden cable) – Customer-specific solutions – Various accessories

DEL-650

Propelling force, max.: 419 N, min.: 30 N – Lowering stroke: 9 mm – Mechanical lock in lower position – Sensors to detect horizontal position of stop plate (damper extended/retracted) – Sensors to detect vertical position of stop plate (raised/lowered) – With manual remote control (bowden cable) – Customer-specific solutions – Various accessories

DEL-800

Propelling force, max.: 419 N, min.: 50 N – Lowering stroke: 9 mm – Mechanical lock in lower position – Sensors to detect horizontal position of stop plate (damper extended/retracted) – Sensors to detect vertical position of stop plate (raised/lowered) – With manual remote control (bowden cable) – Customer-specific solutions – Various accessories

DEL-1100

Propelling force, max.: 419 N, min.: 65 N – Lowering stroke: 9,3 mm – Mechanical lock in lower position – Sensors to detect horizontal position of stop plate (damper extended/retracted) – Sensors to detect vertical position of stop plate (raised/lowered) – With manual remote control (bowden cable) – Customer-specific solutions – Various accessories

DEL-1800

Propelling force, max.: 419 N, min.: 100 N – Mechanical lock in lower position – Sensors to detect horizontal position of stop plate (damper extended/retracted) – Sensors to detect vertical position of stop plate (raised/lowered) – With manual remote control (bowden cable) – Customer-specific solutions – Various accessories

 

 

DEL-2400

Propelling force, max.: 419 N, min.: 130 N – Mechanical lock in lower position – Sensors to detect horizontal position of stop plate (damper extended/retracted) – Sensors to detect vertical position of stop plate (raised/lowered) – With manual remote control (bowden cable) – Customer-specific solutions – Various accessories