Special gas springs

Gas spring with groove

Customised damping with the dynamic groove in the cylinder barrel

The groove in the cylinder barrel of this gas spring type allows the damping properties of the gas spring to be customised precisely to the customer’s requirements. In contrast to conventional gas springs, damping is not achieved via the nozzle, but is controlled by the groove in the cylinder. This results in many advantages. For instance, the damping is effective in any mounting position. Whether the spring is mounted horizontally or with the piston rod pointing upwards, the damping characteristics are always the same.

• Sizes: Ø15, 19, 22
• Stroke: 40 mm – 800 mm

To enable the groove to be designed appropriately, detailed information is required concerning the application and desired function of the gas spring. 

Bansbach Click & Go gas spring

Thanks to its special valve technology, the easystop spring provides a holding force during retraction that enables infinitely variable positioning.
Locking is maintained at each point of the gas spring until the valve is opened by applying an additional force manually,
thereby releasing the locking mechanism. There is no need for actuation.

• Sizes: 10/22 – 10/28
• Stroke: 10 mm – 700 mm
• Forces: 100 N – 600 N
• Holding force: 0 – 1000 N

Bansbach CS gas spring

Thanks to the new Click System – which is integrated into the gas spring –
the gas spring can be locked in the retracted end position. This locking mechanism can be released again without the need for any further release systems. Pushing the piston rod in slightly causes it to perform the full stroke again.

• Sizes: 6/15 – 8/28
• Stroke: 10 mm – 300 mm
• Forces: 40 N – 400 N