Standard Gas springs
Gas compression springs from Bansbach to meet your requirements.
We have specialised in gas springs & gas dampers for over 30 years and carry gas springs from Bansbach, which has over 50 years of experience in manufacturing gas springs of high European quality. Here you will find all gas springs from our standard stock
If you are purchasing from a country other than Denmark, you can find your local distributor here -
https://www.bansbach.com/en/contact/distributors/
Standard lagerførte gasfjedre
We have specialised in gas springs & gas dampers for over 30 years and carry gas springs from Bansbach, which has over 50 years of experience in manufacturing gas springs of high European quality. Here you will find all gas springs from our standard stock programme. If you don't find what you need or need gas springs manufactured to your needs - click here.
Du kan se vores lagerførte standard program - klik her., men du er selvfølgelig også velkommen til at kontakte os på bibus@bibus.dk eller (+45) 75 88 21 22.
Vores standardprogram for gasfjedre samt tilhørende tilslutningsdele og beslag er også tilgængelige på vores webshop Kantlister.dk.
Advantages of Bansbach gas springs
- Highest corrosion resistance achieved through powder coated cylinders and CeramPro treated piston rod surfaces
- Minimal friction for the production of lowest extension forces
- Best life cycles
- Protection against vibration and light side forces
- Integrated grease chamber
- Low breaks away forces
- Installation and storage in any position
Contact
If you are purchasing from a country other than Denmark, you can find your local distributor here -
https://www.bansbach.com/en/contact/distributors/
Otherwise, we will happily assist you with your gas spring request – Contact us on bibus@bibus.dk or (+45) 75 88 21 22, then we’ll help you to what you need.
Calculation of gas springs and dampers
If you need a gas spring or damper for a specific task, you should get a correct calculation for your gas springs pressure, size, stroke length etc.
To best calculate the specifications for your gas spring and how it should be mounted, you should be ready with the following information: the weight, center of gravity, dimensions, movement rate in degrees and the required strength.
* Gas spring mounted with ball socket A3
S = flap center of gravity
G = the flap dead weight
B = distance from the gas spring to pivot point
X = number of springs (usually 2 per. flap)
F1 = gas spring pressure in Nm
You can make use of our calculation form to help you find the correct information to send to us.
Click here to fill out our gas spring calculation form
f you instead have a gas spring that needs replacing, we only need the stroke, total center-length and the newtons of the gas spring, then we can quickly help you find a replacement.
We are available to help you calculate your gas spring - Contact us at bibus@bibus.dk or (+45) 75 88 21 22.
