Brakes and shift clutches
Efficient power transmission and precise braking. Automatic activation of auxiliary drives. Electrical monitoring for maximum safety and performance. Ideal for static and dynamic loads.
Contact us if you have any questions.
Contact us
Our quality brands
TNT 2425
Safety coupling design
TNT 2424
Combined with a torsionally rigid steel disc coupling.
TNT 2420
Standard version with a flange hub and a keyway hub.
Special electromagnetic brake solutions and combinations
Customised electromagnetic brake solutions
Type B
In various designs and sizes
Special electromagnetic clutch solutions and combinations
Customised electromagnetic clutch solutions
Type G
Version with bearing(s)
Type E
Version without bearings
Special solutions and combinations
Customised solutions and combinations with electric brakes or clutches
P-type
Asymmetric pivot clutch
W-type
Pin-guided clutch with two flyweights
S-type
Pin-guided clutch with three flyweights
F-type
Self-increasing clutch
AL and ALP
Types AL and ALP are roller type freewheels. They are designed as bearing-supported basic units with two series 160... ball bearings.
AL..F2D2 and AL..F4D2
The AL..F2D2/F4D2 types are sealed, ready-to-install roller freewheels supported by two series 160.. ball bearings.
AL..G
The AL..G is a bearing-supported roller type freewheel that is contained within a housing. Oil lubrication is absolutely essential.
AL..KEED2
The AL..KEED2 is a sealed, ready-to-install roller type freewheel that is supported by two series 160.. ball bearings and comes pre-filled with oil lubrication.
AL..KMSD2
The AL..KMSD2 self-contained freewheel is a sealed, ready-to-install roller type freewheel that is supported by two series 160.. ball bearings.
ALP..F7D7 and ALMP..F7D7
The ALP..F7D7 is a sealed, ready-to-install roller type freewheel that is supported by two series 160.. ball bearings.
AV
The AV is a roller type freewheel with plain bearings that is suitable for low rotational speeds. Despite its small size, it is still capable of transmitting high torques.
BC MA
Type BC MA is a sealed, ready-to-install roller type freewheel supported by bearings that requires oil lubrication.
CEUS
Type CEUS from the CECON product group is a bearing-supported roller type freewheel that is contained within a housing.
FS, FSO and HPI
Types FS, FSO and HPI are sprag type freewheels that are sealed and supplied ready to install. They are supported by bearings and are either oil or grease lubricated.
GFR and GFRN
Types GFR and GFRN are roller type freewheels. They are supplied as bearing-supported basic units with two series 160... ball bearings.
RDBR-E
Type RDBR-E backstops are mainly used on the drive shafts of conveyors, mixing drum drives or chain conveyors when torque limiting, load distribution or a release function is required.